What should I do if the pressure of the pipe cleaner is insufficient?
The pipe cleaning machine uses the pressure generated by concentrating a large amount of water at one point and spraying it on the surface of the object to quickly clean, roughen, peel, crush, and cut. The pressure is from 50-280MPa, and the flow rate is from each The flow rate of 10L-550L per minute is commonly used in pipeline cleaning machines, and the driving methods include diesel engine and electric driving mode.
All objects to be cleaned have a threshold pressure. If you want to clean the object, you can complete the cleaning as long as the threshold pressure is exceeded. However, there are many misunderstandings when choosing a pipe cleaning machine, and it is often the pursuit of pressure, but the efficiency and performance will be greatly insufficient. In fact, when choosing a pipe cleaning machine, a very important parameter is the impact force. If the pressure determines whether the object can be cleaned or not, the most important unit of the impact force is the water flow. The size of the water flow determines the cleaning efficiency, and there are more complex matching.
The method of adjusting the insufficient pressure of the pipe cleaner is as follows:
1. Check whether the high-pressure nozzle is seriously worn. If the wear is serious, replace the high-pressure nozzle. The high-pressure nozzles of small pressure equipment basically do not wear, because the high-pressure nozzles are basically overheated, but it is difficult to guarantee the high-pressure nozzles of high-pressure equipment.
2. Check whether the water inlet filter is blocked. If the water inlet filter is blocked, remove the filter and clean it with water. If the filter is often blocked due to unclean water, you can enlarge the external filter or replace the clean water.
3. Check the sealing components inside the pressure regulating valve, relief valve and high-pressure water pump respectively, such as: whether the O-ring of the pressure regulating valve and relief valve is worn, whether the spring and seat surface are worn, whether the O-ring inside the pump is worn Abrasion, water seal damage, check valve worn or cushioned by foreign objects.
A pipe cleaning machine is a machine that uses a power device to make a high-pressure plunger pump generate high-pressure water to wash the surface of an object. It can peel off and wash away the dirt to achieve the purpose of cleaning the surface of the object. Because high-pressure water column is used to clean the dirt, high-pressure cleaning is also one of the world's recognized scientific, economical and environmentally friendly cleaning methods.
