How to clean the air conditioner condenser

Proceed as follows:

1. Close the inlet and outlet valves of the condenser respectively, and drain a small amount of water from the system.

2. Establish a temporary circulation system on the inlet and outlet pipes of the condenser. The drain valve, pressure gauge, safety valve, etc. can be removed and connected to the circulation pump outside the tank with a hose.

3. After dissolving the safe and efficient descaling agent, use a pump to inject it from the low water inlet, return it from the water outlet, and soak for about 3-5 hours. At the same time, continuously check the efficacy of the water in the tank until there is no reaction or scale in the tank. Until all is cleaned.

4. Drain the sewage and rinse with clean water. You can open the condenser end cover, and use a brush to pull back and forth on the inner wall of each condenser copper pipe to clean up the sludge and scale on the inner wall of each condenser copper pipe. The sludge scale on the inner wall of each condenser copper pipe is cleaned up.