How To Clean The Lampblack Machine After Cleaning The Lampblack Pipe
Range hood is an electrical product that people use to solve the problem of kitchen fumes. However, after a long time of use, how to clean the range hood after cleaning the fumes pipeline? The surface and inner cavity of the range hood will be full of oil, which will affect its normal smoke exhaust effect. Only when it is removed and washed correctly can it be used normally. Generally, the cleaning process of range hood without filter screen cover is as follows:
1. First, cut off the power of the range hood to ensure personal safety.
2. The shell surface and net cover of range hood are generally cleaned according to the cycle specified in the instruction manual, and cleaned with a soft cloth dipped with a small amount of warm water containing neutral detergent. Then dry it with a dry soft cloth.
3. Disassembly and cleaning of the inner cavity of the wind wheel and spiral case:
(1) Screw off the cover plate and the net cover, and take off the cover plate and the net cover
. (2) Then screw out the fastening screw of the wind wheel and take out the wind wheel.
(3) Soak the removed parts in warm water with neutral detergent, wash them with soft cloth and dry them.
(4) Use a soft cloth with a small amount of warm water containing neutral detergent to wipe the dirt in the inner cavity of the volute, clean it with a soft cloth and then dry it;
(5) Install the above parts in the reverse order of disassembly;
(6) After installation, check whether the oil circuit of the appliance is smooth and whether the sealing ring on the volute can be sealed;
(7) Please clean the air wheel, volute, oil nozzle and oil drain pipe according to the cycle specified in the manual.
4. Precautions for cleaning impeller and volute:
(1) When cleaning, the motor and electrical parts should not be flooded.
(2) When cleaning, do not pull the internal connecting line forcefully, otherwise the connecting point will be loose, causing the risk of electric shock.
(3) It is forbidden to use alcohol, banana water, gasoline and other flammable solvents to clean the range hood to prevent fire accidents.
(4) When cleaning, wear rubber gloves to prevent sharp edges of metal parts from hurting people. (5) The removed parts should be handled with care to avoid deformation. When cleaning the impeller, be careful not to touch or move the counterweight of the blade, otherwise, the whole machine will vibrate and the noise will increase. For those range hoods with filter screen cover, the internal structure of the range hood does not need to be cleaned because the oil smoke has been filtered before entering the appliance. It only needs to clean the appliance shell and filter screen cover according to the cycle specified in the manual. 5. Cleaning of filter screen cover:
(1) Loosen the screws that secure the net cover.
(2) Soak the removed filter cover in warm water with neutral detergent for 5-10 minutes.
(3) Use a soft plastic brush to clean the dirt in the pores of the filter screen, and then dry it with a dry rag.
(4) Install the filter cover as it was before removal.
(5) After installation, check whether the oil circuit of the appliance is smooth and whether the sealing ring on the volute can be sealed.
(6) Please clean the filter cover according to the cycle specified in the manual. How to clean the lampblack machine after cleaning the lampblack pipe? The internal electrical connection and air flow sealing parts of range hood should not be removed and washed frequently. It is easy to cause aging and deformation when the sealing ring is often removed and cleaned, and the oil is easy to enter the electrical connection parts of the appliance, which affects its safety performance and reduces the service life of the range hood.
