Knowledge

1. Close the valve of the cooling water in and out of the condenser tightly, and use the thermometer tube, pressure gauge tube or sewage pipe to connect the anticorrosive pump and

Central air-conditioning condenser is a device that cools high-pressure gas into liquid. If it is not cleaned frequently, it is difficult to reduce the high-pressure gas. Increase

1. Close the valve for cooling water in and out of the condenser, connect the anticorrosive pump with the thermometer pipe, pressure gauge pipe or sewage pipe, and make the liquid

Proceed as follows: 1. Close the inlet and outlet valves of the condenser respectively, and drain a small amount of water from the system. 2. Establish a temporary circulation syst

1. Duct cleaning robot , manual lifting arm, can clean air ducts of different pipe diameters by changing brushes of different sizes; at the same time, by changing the moving mechan

1) Understand the layout of the fresh air duct, return air duct and supply duct system according to the drawings. 2) The unit is cleaned and disinfected with the air duct system. 3

Twelve steps of central air conditioning duct cleaning The general process of cleaning the central air-conditioning duct is as follows: 1. Random sampling and testing of indoor air

The air-conditioning duct cleaning method is: spraying at least one layer of paint on the inner surface of the air-conditioning ventilation duct to form a coating layer on the inne

Anhui Kuaitong Technology Co., Ltd. is a professional supplier of tube and duct cleaning equipment in China, with a workshop of more than 2,000 square meters and a number of patent

Anhui Kuaitong Technology Co., Ltd., as a professional production equipment company, introduces the cleaning characteristics of the condenser tube cleaning machines produced by our

8. Application examples 8.1 Passivated long series When the long series of parts are passivated, the upper and lower ends of the plated parts enter and exit the passivation solutio

1. Pretreatment for pickling passivation Stainless steel workpieces should be cleaned mechanically before pickling passivation if there is any surface dirt, and then degreasing and