Heat Exchanger (heat Exchanger) Cleaning Methods 1

heat exchanger (also known as heat exchanger) non-disintegrated suspension high pressure (500-2800bar) jet cleaning method (physical cleaning) heat exchanger high pressure water jet cleaning technology. It is a high-pressure water jet cleaning technology that pressurizes ordinary tap water to several 500-1500bar heat exchangers through a high-pressure pump. Through a special nozzle (aperture of only 1-2 mm), multiple beams of highly dispersed water jets are sprayed at a very high speed (200-500 m/s). This bunch of small water streams have evenly dispersed vibration and striking energy, will not cause damage to the tank wall, and can remove salt, alkali, scale, and various blockages on the inner wall of the pipe. All kinds of tubular heat exchangers generally have inner diameters of Φ10-Φ50 mm, and the lengths are about 3 meters, 6 meters, 9 meters, and 13 meters. We use steel spray guns and soft guns with corresponding lengths and a variety of nozzles similar to drill bits. In the suspended tube, the fouling in the tube is blown and cleaned, and after being crushed, it is discharged out of the tube with the water flow, and the fouling and clogging inside and outside the tube are efficiently cleaned, and the cleaning effect in all directions reaches more than 90%.